[GermanBobber]

I used the smaller version of the Kellermann Atto to have them almost invisible when off.

Being street legal is much more difficult in Europe than in the States.
Credits to gucci22 for the original idea and design.
Uli

 

[joBZH]

the Kellermans this branch without modification on an indian scout?

 

[GermanBobber]

They do have adapters for Scout & Bobber iLash that are almost plug&play with connectors which do not require modifications to the Indian wiring harness.

 

[Richo]

German Bobber is correct but I think US & European wiring looms are slightly different !! They are a really well engineered lighting solution though Worth trying to make them Work😎

CF9C96E1-23B6-4C1B-AB70-06F6A554214F.jpeg

• Richo
• Dec 22, 2020

 

[gucci22]

How much do you charge I am very interested

IF your just looking for the mount Im able to ship it USPS priority for 30, I have caps to cover the holes after removing the OEM lights for an extra 5. I see above they sell them online for 40 euros, my caps are much slimmer and with a little sanding, prime and painting you wouldn't know its not OEM. everything can be attached with double sided tape or semi permanent glue with no issues, its been over 2 years on my bike so far.

 

[gucci22]

How much do you charge I am very interested

IF your just looking for the mount Im able to ship it USPS priority for 30, I have caps to cover the holes after removing the OEM lights for an extra 5. I see above they sell them online for 40 euros, my caps are much slimmer and with a little sanding, prime and painting you wouldn't know its not OEM. everything can be attached with double sided tape or semi permanent glue with no issues, its been over 2 years on my bike so far.

 

[Seb1818]

I am just about to do the same thing and after a lot of looking have settled on the following.

On the back I'm doing the following, they are super small and super bright. Plus I like these because they are secondary brake lights too for better visibility.

Kuryakyn by Kellermann Atto Satin Black Turn Signal with Red/Red/Amber Turn Signal

When I say small, this small.
View attachment 596680

For the front im going the following. They also are white light so you can be seen better at night.

Custom Dynamics 41mm Black Fork Tube Turn Signals

They make the Kellermann Auto for the front too but not with the white light, just the yellow indicator.

I want a sleek minimalist look to mine and these seem to fit the bill.

You will have to show us what you decide on.

How was the install on the custom dynamics front signals? I was looking into the ones with turn and running but seem to be out of stock just about everywhere.

 

[Anotherpair]

I made custom frame cover and under fender mounts for strip leds. they are 3d printed and I think I'm going to try to sell kits. fronts are also led strips wrapped the shock tube. Fronts are easy direct replacement, used a zip tie on the tube then glued the strip to the zip tie. the wiring for the rears gets complicated and drove me crazy trying to keep full use for running, brake and turns. The only thing that will work on the bobber tail lights is the Joker Machine signal intensifier converter and 2 stage LED strips. my lights flash red when using the turn signal. View attachment 596658

I made custom frame cover and under fender mounts for strip leds. they are 3d printed and I think I'm going to try to sell kits. fronts are also led strips wrapped the shock tube. Fronts are easy direct replacement, used a zip tie on the tube then glued the strip to the zip tie. the wiring for the rears gets complicated and drove me crazy trying to keep full use for running, brake and turns. The only thing that will work on the bobber tail lights is the Joker Machine signal intensifier converter and 2 stage LED strips. my lights flash red when using the turn signal. View attachment 596658

HOW CAN I GET THIS EXACT LOOK? What did you use? how much for a kit sent to me! This is dope!! Please get back to me!!

 

[Mangethenewt]

Hey Gucci22

IF your just looking for the mount Im able to ship it USPS priority for 30, I have caps to cover the holes after removing the OEM lights for an extra 5. I see above they sell them online for 40 euros, my caps are much slimmer and with a little sanding, prime and painting you wouldn't know its not OEM. everything can be attached with double sided tape or semi permanent glue with no issues, its been over 2 years on my bike so far.

wow I really love these for the bobber are you still able to make the mount for the lights?

 

[JD J]

I made custom frame cover and under fender mounts for strip leds. they are 3d printed and I think I'm going to try to sell kits. fronts are also led strips wrapped the shock tube. Fronts are easy direct replacement, used a zip tie on the tube then glued the strip to the zip tie. the wiring for the rears gets complicated and drove me crazy trying to keep full use for running, brake and turns. The only thing that will work on the bobber tail lights is the Joker Machine signal intensifier converter and 2 stage LED strips. my lights flash red when using the turn signal. View attachment 596658

Hey man, do you still do the 3D print for the mount? I would need one. How much and I’ll pay the shipping.

 

[combustionindustries]

Hi all,

I am interested in getting some sleeker turn signals for my bobber and was curious what others have done. Any recommendations for front and rear replacements? Any pics of what you have done?

Maybe try our Combustion Industries Micron lights. They offer the easiest install, are true plug/play and look very streamlined…

 

[ca2mia]

Maybe try our Combustion Industries Micron lights. They offer the easiest install, are true plug/play and look very streamlined…

Do you have any photos of the clear lens versus the smoke? Looking to add to my Scout Bobber. In your opinion, smoked or clear? Thanks

 

[combustionindustries]

Do you have any photos of the clear lens versus the smoke? Looking to add to my Scout Bobber. In your opinion, smoked or clear? Thanks

Here’s a quick side by side of both….personally I like the smoked. We tested a several different ones while developing the product; the heavy tinted lenses blocked too much light so we went with a light smoke which is shown here next to a clear lens….

 

[combustionindustries]

Do you have any photos of the clear lens versus the smoke? Looking to add to my Scout Bobber. In your opinion, smoked or clear? Thanks

Why sure!

 

[rocker13]

IF your just looking for the mount Im able to ship it USPS priority for 30, I have caps to cover the holes after removing the OEM lights for an extra 5. I see above they sell them online for 40 euros, my caps are much slimmer and with a little sanding, prime and painting you wouldn't know its not OEM. everything can be attached with double sided tape or semi permanent glue with no issues, its been over 2 years on my bike so far.

Hey man I was wondering if I could order a tail light mount and caps from you.

 

[combustionindustries]

Hey man I was wondering if I could order a tail light mount and caps from you.

Sure! here is a link: Micron Turn Signals for Indian Scout/Scout Bobber | CombustionIndustries >> then the caps are in the swag section. Thanks! Michael

 

[Bill_Bixby]

I went with dual rat eye taillights from Joker Machine. The LED converter works great.

 

[M&M Eats]

I am just about to do the same thing and after a lot of looking have settled on the following.

On the back I'm doing the following, they are super small and super bright. Plus I like these because they are secondary brake lights too for better visibility.

Kuryakyn by Kellermann Atto Satin Black Turn Signal with Red/Red/Amber Turn Signal

When I say small, this small.
View attachment 596680

For the front im going the following. They also are white light so you can be seen better at night.

Custom Dynamics 41mm Black Fork Tube Turn Signals

They make the Kellermann Auto for the front too but not with the white light, just the yellow indicator.

I want a sleek minimalist look to mine and these seem to fit the bill.

You will have to show us what you decide on.

Do you have pics of them installed also light intensity how good is it ?

 

[combustionindustries]

Do you have pics of them installed also light intensity how good is it ?

Yes sir they are dialed in to a high brightness. Our integrated driver allows us to drive the LED at it's maximum without frying the lights....

Video

 

[thatOnegirl]

I made custom frame cover and under fender mounts for strip leds. they are 3d printed and I think I'm going to try to sell kits. fronts are also led strips wrapped the shock tube. Fronts are easy direct replacement, used a zip tie on the tube then glued the strip to the zip tie. the wiring for the rears gets complicated and drove me crazy trying to keep full use for running, brake and turns. The only thing that will work on the bobber tail lights is the Joker Machine signal intensifier converter and 2 stage LED strips. my lights flash red when using the turn signal. View attachment 596658

Hey are you selling those? I’m interested in buying.