[JonR]

Paid mine off last week. Best thing I’ve done so far. Haha

 

[C. Dolan]

Disconnected the clutch lever switch.
My 2019 model FTR had problems with the throttle acceleration in short bursts when clutch
partially engaged / disengaged down shifting into a corner.
Seemed to be a hazard so I finally eliminated it.
The 2 screws take a # 6 Torz bit or screw driver.
Taped it up and hung on the cable, for now.
I don't know if the later models still do this, but I finally ended the problem on my bike.

 

[ferraiolo1]

Could have been a faulty switch.

Only a matter of time till you forget you did it, and start the bike in gear accidentally!

And installed a racing bros shock on my buddies rr. Also raised the front and rear of the bike up .25in

Sent from my iPhone using Tapatalk

 

[o soup]

View attachment 500556 View attachment 500554 I was gonna do the fender eliminator but forgot the box at home, gonna do it Saturday, took the plate holder off and routed the cables the other day

 

[o soup]

Are there holes to plug after taking off the plate holder? Anything work nicely to fill them?

 

[urgentorange]

Are there holes to plug after taking off the plate holder? Anything work nicely to fill them?

I just put the original bolts back in. Some people have used plastic auto body plugs that you can get at any auto store

 

[Techno Bobber]

PUIG Install

 

[ferraiolo1]

Lots of ftr diversity


Sent from my iPhone using Tapatalk

 

[Techno Bobber]

Could have been a faulty switch.

Only a matter of time till you forget you did it, and start the bike in gear accidentally!

And installed a racing bros shock on my buddies rr. Also raised the front and rear of the bike up .25in

Sent from my iPhone using Tapatalk

Is that an FTR model or made for a different bike?

 

[ferraiolo1]

It’s made specifically for the 2019/20 FTR models.

It’s quite a nice unit, four way adjustable, hydraulic preload, and an adjustable eyelet to adjust the height of the bike HIGHER for more turning clearance.


Sent from my iPhone using Tapatalk

 

[Techno Bobber]

It’s made specifically for the 2019/20 FTR models.

It’s quite a nice unit, four way adjustable, hydraulic preload, and an adjustable eyelet to adjust the height of the bike HIGHER for more turning clearance.


Sent from my iPhone using Tapatalk

I'm gonna get one, I found it on sale.

Shop Indian Motorcycle Parts Accessories Aftermarket customizing

Shop Indian Only Motorcycles largest custom parts & accessories dealer for Scout Chief Chieftain, FTR. Challenger, Roadmaster & Pursuit bikes

indianonlymotorcycles.com

 

[Techno Bobber]

Installed new front brake pads this morning. I just need to go buy a T30 torx bit for the retaining pin so I can torque it to spec.

 

[Techno Bobber]

Carbon fiber cowl install

 

[Boxerdad]

1st morning of having her, let's remove those baffles..
That's better..

 

[Techno Bobber]

Wunderkind sliders installed

 

[Vippen]

Not exactly today, but I recently put some Wunderkind goodies on. Firstly, the good-looking and super-grippy Pro-Taper footpegs didn't really work out for me. My 6'4" composure didn't match the quite broad and almost completely level design, resulting in too pointy an angle of the foot, and poor ergonomics shifting gears.

The Wunderkind pegs solve these two issues. And them being a bit shorter, and of quite a small diameter which I was a bit afraid of, hasn't bother me at all.

While I was at it I got their stylish alloy "what-ever-You-call-them-in-english" for the gear and shift levers too.

So much for ergonimics, and style. Next stop protection, withe their frame and fork sliders.

I left the plastic lids off the frame sliders, think it looks better. And yes, I will replace the exhaust bandage! Any day now...

 

[Neoshaman]

Took a little ride to the VFW to see some old friends, couldn’t resist the photo.

 

[Neoshaman]

Took a little ride to the VFW to see some old friends, couldn’t resist the photo. View attachment 709964

 

[reinie]

Nice picture of your bike beside that Huey.

 

[Neoshaman]

QUOTE="reinie, post: 3721317, member: 1083"]
Nice picture of your bike beside that Huey.
[/QUOTE]
Thank You! If I was better with my IPad it would have been an actual pic, not a thumbnail.
Always nice to see old friends ;