Indian Motorcycle Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 6 of 6 Posts

·
Registered
Joined
·
2,622 Posts
Discussion Starter #1
It seems that I am missing a screw from the back of the switch housing on the right handlebar. I searched Cheap Cycle Parts, but I can't seem to find the screw. Does anyone know a part number for these screws, or the measurements for the screws?

Sent from my SM-G975U using Tapatalk
 

·
Founding Member / Distinguished
Joined
·
4,413 Posts
Call the dealership parts department and see if they can ship it to you.


Sent from my iPad using Tapatalk
 

·
Rider
Joined
·
1,262 Posts
What year and model bike?

This is from a 2018 CFTN CLSC

SCR-TFPH-M4X1.79X25 ZPC

Is pulling a screw from another spot on the housing and matching it at a hardware store an option? That's what I'd do.
 

·
Bronze member
Joined
·
2,638 Posts
Go to your hardware store...you know it’s a metric screw and about how big it is. Shouldn’t be too hard to find the match.
 

·
Registered
Joined
·
137 Posts
I believe they are 4 mm dia screws in the switch housing. I find Tractor supply often has a good selection and they are cheap.
 

·
Registered
Joined
·
2,622 Posts
Discussion Starter #6
What year and model bike?

This is from a 2018 CFTN CLSC

SCR-TFPH-M4X1.79X25 ZPC

Is pulling a screw from another spot on the housing and matching it at a hardware store an option? That's what I'd do.
Sorry...2017 RM. Oddly enough, when you search the part options for 2018 and above, there is a diagram of the switch housings that shows the screws. For 2017 and older, it only shows the separate components. I am not entirely sure that the part number that you provided will fit, since they redesigned the housings in 2018. And yes, I can pull one of the other screws and go to the local OBI. However, it is almost a waste of gas to make a trip to the store for one screw.
 
1 - 6 of 6 Posts
Top