Indian Motorcycle Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
252 Posts
So you don’t like the heat issue and you would like to run a PVCX. There are tutorials about removing the stuffing in the CAT. And if you are going to do that consider coating the inside of your exhaust pipe. I had to do a lot of research but I believe my exhaust temperature has fallen off by at least 40 degrees according to the pyrometer.I used an Eastwood ceramic exhaust header coating for the inside of the pipe. If you coat the inside prep is key be sure to remove the O2 sensor and when coating the inside you should do 2 coats.
The PVCX is a great investment and Craig B can tune a lot of the clacking out believe it or not. PVCX is by far the biggest bang for the buck on these bikes. I believe that you will enjoy the feel of a new tuned bike.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top