Indian Motorcycle Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
98 Posts
Discussion Starter #1
Hi all, thought I would just like to highlight a pressing issue I came across while trying to install the Billet Floorboards onto the mounting kit. The parts are complete except for the fact that the PIVOT PIN is supposed to be 55mm and its only 48mm and thus the pin will not go thru all the way in order to be able to mount the clip in the groove. I've included pictures below and hope that the set I got is maybe 1 out of 100 pcs. Cos I don't think the whole batch is defective.
mounting kit incomplete.jpg

mounting kit.jpg

pin & clip.jpg

pivot pin.jpg
 
1 - 2 of 2 Posts
Top