Indian Motorcycle Forum banner

1 - 6 of 6 Posts

·
Bronze member
Joined
·
1,841 Posts
Discussion Starter #1
So I’ve had this Indian clock for a couple of years. The neon lights went out. I can’t tell that they’re blown. Maybe they are. The clock works but the lights don’t. Anything to look for? Are there any fuses inside the clock possibly? Worth messing with it all? TIA
588408
48B607F2-EFEE-44FE-BA23-12077BC65809.jpeg
 

·
Rider
Joined
·
1,568 Posts
I'm not that savy with the terminology but if there isnt a break in the glass then its a component the heats up the gas or regulates it. Id see if there is a guy at the local antique mall who does neon or knows someone might be a cheap fix.
 

·
Bronze member
Joined
·
1,159 Posts
Check if your wall adapter is putting out the specified dc voltage.
or try swapping with a similar output adapter

If that is good, the the high voltage power supply in the clock is toast.
Might check ebay for neon power supply replacement?
 

·
Bronze member
Joined
·
1,841 Posts
Discussion Starter #6
I will look at that tonight thanks
 
1 - 6 of 6 Posts
Top