[BuffaloBrand.Co]

Installation video of our Patent Pending BuffaloBrand.Co Air Horn System being installed on a
2016 Indian Springfield 150th Anniversary Jack Daniels by American Custom Engineering, LLC.

 

[Springfield Darkhorse]

I utilized this video to help me install the Buffalo Brand horn on my 2019 SF Darkhorse, My 2019 model was different in which all I had to do was disconnect the connector to the horn which is actually in the front of the engine in between the forks. No horn to pull off from underneath the horn cover. remove one bolt and attach the bracket/horn assembly on the existing bracket. Should have taken less than 30 minutes to install, but I was trying to follow the video in its exact detail.

 

[Sthomasson72]

I utilized this video to help me install the Buffalo Brand horn on my 2019 SF Darkhorse, My 2019 model was different in which all I had to do was disconnect the connector to the horn which is actually in the front of the engine in between the forks. No horn to pull off from underneath the horn cover. remove one bolt and attach the bracket/horn assembly on the existing bracket. Should have taken less than 30 minutes to install, but I was trying to follow the video in its exact detail.

So did you not have to remove the seat and run new wire harness?

 

[Springfield Darkhorse]

So did you not have to remove the seat and run new wire harness?

Yes still had to remove the seat and run the wire harness. The OEM horn is in a different location on my 19’ SF DH compared to the video and the Horn cover uses a different set of bolts that comes with the new horn versus the video in which the OEM bolts are utilized again.