[TomWoodgeard]

Hello I have purchased 2 items that didn't come with instructions.

Solo Grab Rail - 2879604-156

Pinnacle Solo Rack - 2885004-156

I understand there are some spacers involved and possibly removing the rubber spacers when using

the rail and rack together.

Can someone email me a copy of those? [email protected]

Thank you!! Tom Woodgeard - Sarasota, FL

 

[sjscabral666]

I pulled this from the Indian website. Hope it helps.

 

[Raven King]

Putting the solo rider grab tail on my wife's bike too.
It came with these same instructions.
Had the dealer put the Solo Rack on, so I don't have those instructions.

Please post your results.

 

[Raven King]

The instructions say to mount the solo rack to the seat base"PRIOR" to the seat rail.
Not possible.....
Insert seat rail and Solo Rack into passenger seat openings in driver seat TOGETHER!
Seat rail on bottom and rack in top. (Looking at seat upside down)
See pic.

 

[Raven King]

In putting back together, something just didn't seem right.

My solo rack was put on at the dealer, so I'm going a little blind.
My rack needed to be disassembled 1st.
Here's a thread on this forum so that shows everything that needs to be done.

Solo Rack and Grab Rail Installation

I searched around for good photos and instructions on how the solo luggage rack and grab rail would fit together but didn't find much. The installation went relatively smooth with before/after photos and step by step instructions below. Perhaps they may be useful for someone. Before: After...

www.indianmotorcycles.net

I'm starting over.....😖

Same Thing as I did without the solo rack being assembled. Doh!😖😬

 

[TomWoodgeard]

Thank you sjscabral666 and Raven King! This helps. If I could only find the instructions on the Rack.

The photos and link were great!

 

[Raven King]

I put the Solo Rack & Grab Rail into the slot on the bottom of the seat together rather than individually.
Then I put the Black Allen Bolts in to mount the RACK then the 2 Spacers & Chrome Allen Bolts for the grab rail. (It just worked better for me that way)

 

[TomWoodgeard]

Ok... thanks for all the help. It was pretty easy. I think the factory instructions should be clarified.
Thanks again......Tom