Indian Motorcycle Forum banner
  • Hey everyone! Enter your ride HERE to be a part of MAY's Ride of the Month Challenge!

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I would like to mount a garage door opener in the console and wire it to one of the unused buttons on the console (saddlebag / heated grips). All I need the button for a is to act as a momentary button to activate the opener. In theory this is simple as I did it on my VTX1300 by drilling a small hole in a cover and soldering the wires to the backside of the button on an opener.
Looking at the console it appears I should have room for the opener under the Indian Logo (placeholder for a fuel gauge I believe). I guess my biggest question is this. I see on pictures of a switch for a saddlebag lock has 4 wires going to a connector am I able to cut the connector away and use only 2 wires to the opener?
GDM inside.jpg Console.jpg
 

·
Super Moderator
Joined
·
5,868 Posts
Search the forum for "Garage Door Opener". There are several threads on this.
 
1 - 2 of 2 Posts
Top