Indian Motorcycle Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter #1
Hey gang,

I just ordered some KTS Apache bars. Does anyone know if the clutch side grip is glued on or connected to the housing or OEM bar with a screw? Sorry for the noob question but I’m away from my bike and google hasnt helped.
Tony
 

·
Bronze member
Joined
·
4,113 Posts
Hey gang,

I just ordered some KTS Apache bars. Does anyone know if the clutch side grip is glued on or connected to the housing or OEM bar with a screw? Sorry for the noob question but I’m away from my bike and google hasnt helped.
Tony

They stopped using the screw on the 2018 and up models. All 2018+ glued on and pretty dam well unfortunately
 

·
Registered
Joined
·
97 Posts
I removed mine relatively easy. Put a thin long screwdriver in there to break the glue, twisted the grip and it came right off. Just did this again with a challenger the other day

Sent from my SM-G975U using Tapatalk
 

·
Registered
Joined
·
66 Posts
Discussion Starter #5
I removed mine relatively easy. Put a thin long screwdriver in there to break the glue, twisted the grip and it came right off. Just did this again with a challenger the other day

Sent from my SM-G975U using Tapatalk
So you’re saying I should just buy new grips? 😂
 

·
Registered
Joined
·
194 Posts
Grab it with both hands and give it a real good twist. It’ll come off.


Sent from my iPhone using Tapatalk
 
1 - 11 of 11 Posts
Top