Search Results for ‘turn signal’

While I was living in the US, I bought a '21 scout bobber and this year when I did move back to Europe I decided to take it with me. Most of the things on the bike were compatible with the EU standards, all I had to do is to replace the rear lights. I bought the EU version of OEM ones. Adding it...

Hey Bobber riders - Some of you have been asking if we can offer our Micron turn signals in amber/red for the international Scout Bobber model. These signals are now available in red + amber 4 wire design for international use. Note that these are not e-marked. Turn signal: In operation:

So I’m really not sure what part I need to get to fix this…. Noticed mid ride that my left turn signal came loose and is hanging. Any suggestions on a work around or replacement parts? Here’s some photos of it.

I recently purchased the Highsider Rocket Bullet LED Integrated Turn Signals (Amber\Red). Upon unpackaging the lights, I was relatively impressed w/ the design and finish of the product. However, I did notice one complication out the gate which is that the lights don’t come w/ an...

Has anyone changed the tail lights on your 2019 bobber? Clearly they are wired different than the 18. I have joker machine dual rat eye tails and got an intensifier to run both lights at the same time as the driving, blinker, and brake light but it uses ground signal for the blinker and not...

Howdy, Anyone know how fast the turn signal will blink if the rear bulbs are LEDs without a ballast resistor? Thank you!

Hey everyone. I hate the front and rear signals on the bike so I'll be swapping out the front for the Joker Machine Dual rat eyes which seems easy enough, and then for the rear, I found a tail light with turn signals that will mount under the rear fender (it's a bobber). For those of you that...

I'm interested in replacing my stock turn signals with either a set of fork wrap around or bar end signals. I only know of one option each. Are there any other options I could look into? If I get them, would I also need to install anything else? A load isolator for instance. Bar End: Motogadget...

Indian Scout all in one fender light ran across this on face book - thought it was cool.

Anyone upgraded or modified the turn signals? I am working on blocking out my 2015 scout. I ordered the kuryakyn torpedoturn signals, but i don't think they will match up too the rubber base on the oem mounts. Thoughts? Ideas?

Just got the side mount plate put on and the dealer says what about moving the turn signals. However, he didn't really have any suggestions. Has anyone done this? Please post photo's, if so. Ride Safe!!

So I hated the OEM egg-yolk-colored, single function only turn signals. Our lights have a constant power with switched ground, so most offerings are incompatible even in the single-function variety. I believe the more lit up you are, the safer. My goal here is to come up with a way to have...

Hello, Did someone already installed these turn signal? is there anything to know in order to properly connect? thx for the answer. size in mm, 42,5 = 1,673“

Decided to replace the signal bulbs with LED's. I discovered the amber plastic lens cover was damaged beyond repair by over-tightened screws when originally assembled. This problem was discovered by several Scout owners whose 5 or 2 year warranty will cover this issue. You would think that just...

Hello all; About 50 % of the time, my turn signals don't cancel. I feel this is a safety issue. (Either I'm looking down to see if they cancelled, or oncoming motorists think I am turning, when I'm actually going straight). I had the Stage 1 flash done and at that time I asked the dealer to...