Indian Motorcycle Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 25 Results
  1. Indian Scout
    Afternoon all. I've chopped my stock lights off with the intention of splicing the kellerman 3 in 1 bullets LEDs to pop under the floating seat on some thing I'll fabricate to hold them a touch wider (I worry when they're too hidden). My problem, the wiring loom has some unexpected colours and...
  2. Indian Scout Guides and How-To's
    hello, I am building a new rear fender for my 2016 scout, my goal is to create custom turn signals and break lights to work with the new design. I have some yellow and red outdoor 12 volt led strips laying around that I intend to use. I am gonna go out on a limb and assume that this is not going...
  3. Indian Motorcycle General Discussion
    OK... I KNOW that this subject has been darn near beat to death, But I have to ask, because my OCD will not let me cut any wires on my bike before I am positive I am not making a mistake. I have ALL the soldering tools, Heat shrink solder connections, heat shrink tubing. I purchased a...
  4. 20210912_191715.jpg

    Emergency Flashers are on.
  5. Indian Motorcycle General Discussion
    Just added the hogworkz led lights to my vintage here are some pictures. The light focus is great First image is low beam headlight only Second is high been headlight only Third is high beam headlight and driving lights on
  6. Indian Motorcycle General Discussion
    One of my 35w bulbs in my aux lights burned out and I've got some LEDs laying around. They are 40w. Will the extra bit of wattage cause to much of a drain on my battery or should it be ok, anyone know?
  7. Indian Roadmaster
    I have an "Instrument Panel" LED on my Roadmaster (2016) that does not work. it is the light of the fuel indicator. I disassembled the Instrument Panel and when I had it on my work table I stopped because I asked myself many questions: - Is the LED replaceable? - Is the chassis hermetically...
  8. Indian Scout
    Has anyone been successful with this? The Denali fork tube brackets are definitely too lightweight for this and I'm returning them. I'm thinking of taking a ride to Twisted Throttle and/or Cycle Gear to see what they might have on the wall. Also thinking Memphis Shades Turn Signal Relocation...
  9. Indian Scout
    Howdy, Anyone know how fast the turn signal will blink if the rear bulbs are LEDs without a ballast resistor? Thank you!
  10. Indian Chieftain
    I purchased these lights (Headlight & Driving lights) for my 2014 Chieftain https://www.vicbaggers.com/product-page/7-led-headlight-with-driving-lights The headlight was plug and play and seems to run without issue. When I connect the driving lights though, they do not come on at all. I've read...
  11. Motorcycle Riding Gear & Accessories
    I saw a video on YouTube of a LED kit under the tank of a cruiser/tour bike. It was a single strip light (one on each side) that pulsed back and forth from the middle out, chased, flashed, knight rider effect, etc. I cannot for the life of find that video again or the lights. Does anyone have...
  12. Indian Motorcycle General Discussion
    Hello all, I did my first modificatiuon to my new roadmaster. I installed a Joe Florida light kit. I opted for the 288 PRO light kit for $439 I know this is expensive compared to most LED light kits BUT the PRO series has a great safety feature that I think is worth it. You can have the...
  13. Indian Chieftain
    While at bike week last we I bought and LED lighting system to give the Blue Goose some lighting bling. My question would be is since this systems is attached to the battery and knowing how Indian runs everything through the ECM will I be safe attaching this to my beautiful bike. The system is...
  14. Indian Scout Guides and How-To's
    I'm attempting to install Rizoma Club S lights. I'm following this article Long-Term Indian Scout: Rear Fender Modification I need help with wiring up factory lights to those lights. I don't think I need a module. I believe I can make them work with relays. What do you guys think? I have 6...
  15. Indian Chieftain
    I despise the lights on my Chieftain. They are weak and can be outridden an night at even moderate speeds. I had the factory LED light kit done, and they are no better. I love the light on my Victory Cross Country. Had the HID lights put in and they are Amazing. Are there any HID lights...
  16. Indian Dark Horse
    I saw one of these on a Chieftan Darkhorse at our local Madison Indian Dealer and picked up and installed one. Cyron The Beast 4000 lumen led with long throw pattern. It was a simple drop in install once I had the nacelle off, though there is an extra wire for daytime running lights that you...
  17. Indian Motorcycle Builds
    Upgrades so far: - Black LED headlight and driving lights (Chinese made, still much brighter than stock) - Klockwerks tinted flare 12" windshield - Polk DB521 speakers with BoomMats - Black carbon fiber fender and saddlebag trim (just bought the rolls from an auto parts store; about $35) -...
  18. Indian Roadmaster
    I'm into being seen by the door slamming, cell phone junky, knuckleheads, BEFORE they ram into me from behind. How about finding an auxiliary lamp assembly that fits in the rectangular space below the trunk, above the tail light? At 9.75" x 1.5" it's the perfect place for a nice bright LED...
  19. Indian Scout Guides and How-To's
    History, I need to preface this thread with: I have hyper lites multi function lights front and back on my Scout and they work fine in all modes / functions because the brains are built into the modules. My "however" Issue: I've been working on my Rizoma Club multi-function LED running lights...
  20. Indian Motorcycle General Discussion
    History, I need to preface this thread with: I have hyper lites multi function lights front and back on my Scout and they work fine in all modes / functions because the brains are built into the modules. My "however" Issue: I've been working on my Rizoma Club multi-function LED running lights...
1-20 of 25 Results
Top