Indian Motorcycle Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
handlebars
1-20 of 37 Results
  1. Indian Motorcycle General Discussion
    I am trying to find some images of the +8 or +10 Apaches on a Chieftain. All of the Apache pics I can find are the +6. If anyone has and could share an image or two I would be very appreciative!
  2. Parts for Sale/Wanted
    Brand new condition; never used. Absolutely no nicks, dents, scratches, bends, etc. Had dealer install reduced reach bars before I even picked up my 2017 Scout69. These OEM bars have been hanging on the barn wall since day one. Time to sell. $75 (US) + shipping, OBO.
  3. Indian Scout
    Anyone got any pictures of 12” or taller handlebars on their bobber? I want to have a look and see which I like the best before buying. thanks
  4. Parts for Sale/Wanted
    Selling 14" chrome handlebars that were lightly used for about 2 years. They are in great condition. I will take some pictures of the actual bars and post them soon. I would like $150 including shipping but will entertain all offers...
  5. Parts for Sale/Wanted
    Selling a brand new handlebar from Torch Industries. https://torchind.com/product/rival-2/ The bars have never been mounted and are in mint condition. $350 OBO Listed here as well: https://minneapolis.craigslist.org/hnp/mpo/d/minneapolis-torch-rival-handlebars/7275113742.html The Rival bar...
  6. Indian Scout
    Sold. Don’t know how to delete post.
  7. Indian Motorcycle General Discussion
    Does anyone know what aftermarket apes (16") will fit on the 2018 Indian Chief Vintage? Carlini? L.A. Choppers? Wild 1's?
  8. Indian Motorcycle General Discussion
    Hey peeps, New to forum here. Just a quick question about installing a set of Dean Speed 14" low ball 1 1/4 handle bars. Has anyone on here installed a set? pitfalls? do you need cables and wire extentions? I guess thats more then 1 question!!! Thanks, for any insight.
  9. Indian Motorcycle Builds
    I have the FMB Mercenary handlebars for my 2020 scout on the way, and I've not seen anyone run their wires for controls internally. I was wondering if anyone out there with these bars can tell me if they're built so that I can hide the control wires. Thanks in advance!
  10. Indian Scout
    I just bought FMB Hells Gate handlebars for my Bobber. I HAVE ABS. FMB recommends +2” cables. Are all cables made the same? How do I go about finding the correct ones that will fit my bike? Where do I find the plug and play electrical wiring extender so I don’t have to solder more wire in...
  11. Indian Scout
    Trying to decide between FMB Choppers 10" Blazed ape hangers or the Dean Speed Low Ball 1 1/4" bars. Differences I see are pullback: FMBs have 8" and Dean Speed has 3.5". Both are 1 1/4 tubing. FMB has bar-end bungs for mirrors, DS doesn't specify. FMB mentions blazed, DS doesn't. Any...
  12. Parts for Sale/Wanted
    I’ve got some stock parts for sale, when I got my FTR 1200S I ordered the spoked wheels, white LED marker lights, raised pro-taper handlebars and a few other misc. parts. I’m interested in selling the original stock aluminum wheels $200 each, both never used and boxed up at the dealer. The stock...
  13. Indian Motorcycle Tech Q & A
    I recently installed a set of 10" mini apes on my scout bobber. I have a 2019 with ABS so if anyone has any questions on install let me know, it only took about 3 hours. The stock handle bars have bungs in the ends to hold the stock mirrors, the new handle bars have nothing. I would like to...
  14. Parts for Sale/Wanted
    I have a brand new still in wrapping bars from Dean Speed. They are the 12" Low Ball with 3.5" pullback. You can see them here... Low Ball 1 1/4" I bought these for my Vintage, but I'm too short for these. They have some small scrap marks where I temporarily placed them in handlebar clamp to...
  15. Indian Chief Vintage
    I've been researching and reading thread after thread on what handlebars will fit the Vintage. I've tried stock, Springfield and Reduced Reach, but still need something more comfortable. So my question is: Do the Chieftain stock bars fit the Vintage? I could not found a "definite" answer in...
  16. Parts for Sale/Wanted
    Looking to see if anybody has a set of takeoff Springfield handlebars. Trying to find something more comfortable for my vintage. I had a set of Springfield bars once, but they bothered my wrist. I'm thinking I didn't give it enough time trying them out (different positions up/down). I...
  17. Parts for Sale/Wanted
    Indian 16" Apes in great shape. Some rub mark wear from brake line but nothing serious. No scratches that I saw. They've been powder coated flat black to match dark horse tins. $180. Asking price is because they're already powdercoated to match a dark horse. Let me know if you have questions.
  18. Parts for Sale/Wanted
    Hello All, I would like to know if any body selling bobber handlebars and end mirrors? I have a 2016 scout sixty and interested to put these on mine. Thanks Rob
  19. Parts for Sale/Wanted
    I have some dealer take-off's from my 2017 Roadmaster that I am looking to get out of my garage. All removed at about 100 miles, and are like new. PM me an offer: Stock Handlebars Stock kickstand Stock mufflers
  20. Parts for Sale/Wanted
    I have miscellaneous STOCK parts available that I removed from my 2016 Scout. Shipping costs are not included from Idaho USA... you pay that ahead of time... I will refund any overpayment of postage via PayPal with a photo of the USPS Receipt. Pay via PayPal (Friends & Family, no fees). All...
1-20 of 37 Results
Top